_Ά
S. Honda, S. Hashimoto, S. Iwata, Y. Iwamoto, "Anisotropic properties of highly textured porous alumina formed from platelets," Ceram. Int. 42 (2016) in press.
S. Hashimoto, T. Machino, H. Takeda, Y. daiko, S. Honda and Y. Iwamoto, "Antimicrobial activity of geopolymers ion-exchanged with copper ions", Ceram. Int., 41, No. 10, Part A, 13788-13792 (201512).
T. Machino, S. Hashimoto, H. Hirano, S. Honda and Y. Iwamoto, "High Temperature Characteristics of Potassium Geopolymers" UNITECR2015 - 14th Biennial Worldwide Congress, Vienna, Austria (2015)iProc.)
S. Hashimoto, H. Takeda, S. Honda and Y. Iwamoto,"Novel coloring of geopolymer products using a copper solution immersion method," Constr. Build. Mater., 88, 143-148 (201507).
μμCκ, σκγΔ½, Tcΐa, ]\ξ, ΄{@E, ΐBMΧ, ΎcqF,"ΞnZ@ΙζιSrTiO3P»Μη¬Ζ»Μυ§ί«,"J. Flux Growth., 9 [2], 50-55 (201412)
Hayami Takeda, Shinobu Hashimoto, Sawao Honda and Yuji Iwamoto "The Coloring of Geopolymers by the Addition of Copper Compounds, " Ceram. Int. 40, 6503-6507 (201406).
H. Takeda, S. Hashimoto, H. Kanie, S. Honda and Y. Iwamoto, "Fabrication and characterization of hardened bodies from Japanese volcanic ash using geopolymerization, " Ceram. Int. 40. 4071-4076 (201404).
H. Takeda, S. Hashimoto, H. Matsui, S. Honda and Y. Iwamoto, "Rapid fabrication of highly dense geopolymers using a warm press method and their ability to absorb neutron irradiation, " Constr. Build. Mater. 50, 82-86 (201401) .
H. Takeda, S. Hashimoto, A. Yokoyama, S. Honda and Y. Iwamoto, "Characterization of Zeolite in Zeolite-geopolymer Hybrid Bulk Materials Derived from Kaolinitic Clays" Materials, 6, 1767-1778 (2013).
M. Aoyama, Y. Amano, K. Inoue, S. Honda, S. Hashimoto, Y. Iwamoto, "Synthesis and characterization of Mn-activated lithium aluminate red phosphor" J. Lumin., 136, 411-414 (2013).@
M. Aoyama, Y. Amano, K. Inoue, S. Honda, S. Hashimoto, Y. Iwamoto, "Synthesis and characterization of lithium aluminate red phosphor" J. Lumin., 135, 211-215 (2013).
S. Hashimoto, T. Umeda, K. Hirao, N. Kondo, H. Hyuga, Y. Zhou, S. Honda and Y. Iwamoto, "Energy efficient synthesis of porous ZrO2 with fine closed pores by microwave irradiation" Mater. Lett., 93, 293-296 (2013).
A.P. Luz, M.M. Miglioli, T.M. Souza, S. Hashimoto, S. Zhang, V. C. Pandolfelli, "Effect of Al4SiC4 on the Al2O3-SiC-SiO2-C refractory castables performance" Ceram. Int., 38, 3791-3800 (2012).
T. Hayami, S. Hashimoto, T. Iwata, S. Honda and Y. Iwamoto, "Fabrication of bulk materials with zeolite from coal fly ash" J. Mater. Cycles Waste Manag., 14, 403-410 (2012).
S. Honda, S. Hashimoto, Y. Ito, R. Hanai, H. Hirano and Y. Iwamoto, "Improvement on characteristics of porous alumina from platelets using a TEOS treatment" Ceram. Int., 39, 1265-1270 (2013).
S. Hashimoto, T. Umeda, K. Hirao, N. Kondo, Y. Zhou, H. Hyuga, S. Honda and Y. Iwamoto, "Fabrication and characterization of porous ZrO2 with a high volume fraction of fine closed pores" J. Eur. Ceram. Soc., 33, 61-66 (2013).
S. Hashimoto, S. Honda, T. Hiramatsu and Y. Iwamoto, "Fabrication and porous spinel (MgAl2O4) from porous alumina using a template method" Ceram. Int., 39, 2077-2081 (2013).
S.Hashimoto, N.Nishina, K.Hirao, Y.Zhou, H.Hyuga, S.Honda and Y.Iwamoto, "Formation Mechanism of Ti2AlC under the Self-propagating High-temperature Synthesis (SHS) Mode" Mater. Res. Bull., 47, 5, 1164-1168 (2012).
A. Ducastel, S. Hashimoto, T. Ishihara, S.Honda and Y. Iwamoto, "Mechanical Properties of Al8B4C7 with Alumina Platelets" Journal of the Technical Association of Refractories, Japan 31, 4, 203-207 (2011).
P. Gohsh, M. Zamri, D. Ghosh, T. Soga, T. Jimbo, S. Hashimoto, S. Ohashi and M. Tanemura, "Improvement in Field Electron Emission Performance of Natural-Precursor-Grown Carbon Nanofibers by Thermal Annealing in Argon Atmosphere" Jpn. J. Appl. Phys., Vol.50, 01AF09-1-4 (2011).
S.Hashimoto, S. Ohashi, K. Hirao, Y. Zhou, H. Hyuga, S. Honda and Y. Iwamoto, "Mechanical for the Formation of SiC by Carbothermal Reduction Reaction Using a Microwave Heating Technique" J. Ceram. Soc. Japan, 119, 10, 740-744(2011).
Y. Nishimura, S. Hashimoto, S. Honda and Y. Iwamoto, "Dielectric Breakdown and Thermal Conductivity of Textured Alumina from Platelets" J. Ceram. Soc. Japan, 118, 11, 1032-1037 (2010).
H. Takeda, S. Hashimoto, S. Honda and Y. Iwamoto, "In-situ Formation of Novel Geopolymer-Zeolite Hybrid Bulk Materials from Coal Fly Ash Powder" J. Ceram. Soc., Japan, 118, 8, 771-774 (2010).
S. Hashimoto, S. Horita, Y. Ito, H. Horita, S. Honda and Y. Iwamoto, "Synthesis and Mechanical Properties of Porous Alumina from Anisotropic Alumina Particles" J. Eur. Ceram. Soc., 30, 3, 635-639 (2010).
S. Honda, Y. Ogihara, T. Kishi, S. Hashimoto and Y. Iwamoto, "Estimation and Thermal Schock Resistance of Fine Porous Alumina by Infrared Radiation Heating Method"J. Ceram. Soc., Japan, 117, 11, 1208-1215 (2009).
S. Honda, K. Kimata, S. Hashimoto, Y. Iwamoto, M. Yokoyama, J. Shimano, K. Ukai and Y. Mizutani, "Strength and Thermal Shock Properties of Scandia-Doped Zirconia for Thin Electrolyte Sheet of Solid Oxide Fuel Cel" Materials Transactions, 50, 7, 1742-1746 (2009).
Y. Nishimura, K. Akikawa, S.-M. Choi, S. Hashimoto and Y. Iwamoto, "Relationship between Functional Properties of alumina-based nanocomposites and Locations of Dispersed Particles" J. Ceram. Soc. Japan, 117, 7, 836-841 (2009).
H. Awaji, Y. Nishimura, S-M. Choi, Y.Takahashi, T.Goto, and S.Hashimoto, "Toughening Mechanism and Frontal Process Zone Size of Ceramics" J. Ceram. Soc. Japan, 117, 5, 623-629 (2009).
T. Iwata, E.Hattori, K.Sugiura, S. Hashimoto and K. Fukuda, "Syntheses and Crystal Structures of Si-bearing Layered Carbides ZrAl8C7 and ZrAl4C4" J. Ceram. Soc. Japan, 117, 1, 37-41 (2009).
K. Sugiura, T. Iwata, N.Sunada, S. Hashimoto, H.Nakano and K.Fukuda "Syntheses and Crystal Structures of Ge-bearing Layered Carbides Zr2Al4C5 and Zr3Al4C6"J. Ceram. Soc. Japan, 117, 1, 22-26 (2009).
S. Hashimoto, T. Ishihara, K. Inoue, S. Honda, Y. Iwamoto and S. Zhang, "Synthesis and Mechanical Properties of Al8B4C7" J. Ceram. Soc. Japan, 117, 1, 18-21(2009).
S. Hashimoto, T. Asano, K. Inoue, S. Honda, Y. Iwamoto and S. Zhang, "Sintering Mechanical Properties of Complex Carbides in the Al-Si-C System" Journal of the Technical Association of Refractories, Japan, 29 [1] 21-25 (2009).
S. Hashimoto, K. Hattori, K. Inoue, A. Nakahashi, S. Honda and Y. Iwamoto, "Self-flux Synthesis and Photoluminescent Properties of LiAl5O8" Mater, Res. Bull., 44, 1, 70-73 (2009).
A. Doncieux, D. Stagnol, M. Huger, T. Chotard, C. Gault, T. Ota and S. Hashimoto, "Thermo-elastic Behaviour of a Natural Quartzite: Itacolumite" J. Mater. Sci., 43, 12, 4167-4174 (2008).
Y. Nishimura, T. Nishizawa, E.Mochizuki, T.Goto, Y.Takahashi and S. Hashimoto, "Development of a New-Generation RoHS IGBT Module Structure for Powder Management" Transactions Japan Institute Electronics Packaging, [1] 1, 40-47, (2008).
T. Iwata, E. Hattori, S. Hashimoto and K. Fukuda, "Synthesis of Crystal Structure of a New Layered Carbide ZrAl4C4" J. Am. Ceram. Soc., 91[8] 2713-2715 (2008).
@ K. Fukuda, M. Hisamura, T. Iwata, S. Hashimoto, H. Nakano, "Synthesis and Crystal Structure of a New Layered Carbide [Zr1.97Y0.03]Al4C5" J. Am. Ceram. Soc., 91 [4] 1342-1345 (2008).
ΌΊFF, μ«κY, Α@¬ϋa, ΄{@E, WHpv, "imTCYjbPYΑA~iήΜΑ«]Ώ" iEvaluation of Nano-Sized Nickel Dispersed Alumina Materialsj ήΏ, Vol.57 No.10, 1054-1060 (2008).
S. Hashimoto, M. Takeuchi, K. Inoue, S. Honda, H. Awaji, K. Fukuda and S.Zhang, "Pressureless Sintering and Mechanical Properties of Titanium Aluminum Carbide" Mater. Lett., 62, 10-11, 1480-1483 (2008).
S. Hashimoto, H. Takeda, A. Okuda, A. Kambayashi, S. Honda, Y. Iwamoto and K. Fukuda, "Detoxification of Industrial Asbestos Waste by Low-temperature Heating in a Vacuum" J. Ceram. Soc. Japan, 116, 2, 242-246 (2008).
cΝβέ, ΄{@E, cΔj, {½ςY, WHpv, cχκY, "«t―ATCgΜ³Q»" (Detoxification of Sprayed Amosite) J. Ceram. Soc. Japan., 115 [9], 562-566 (2007).
΄{@EAcΝβέAcΔjAγΡ@WA{½ςYAWHpvAcχκYA"AXxXgπάήpήΜ³Q»ΖZg»iΦΜ Kp"iDetoxification of Asbestos-containing Building Material Waste and Its Application to Cement ProductjJ. Ceram. Soc. Japan, 115, 4, 290-293 (2007)
K. Fukuda, H. Hasegawa, T. Iwata and S. Hashimoto, "Structural Disorder and Intracrystalline Microtexture of Ώ'H-(Ba0.24Ca0.76)2SiO4" J. Am. Ceram. Soc., 90, 3, 925-931 (2007).
΄{@EAcΔjAγΡ@WA{½ςYAWHpvAcχκYA"«t―NVhCgΜ³Q»"iDetoxification of Sprayed CrocidolitejJ. Ceram. Soc. Japan, 114, 12, 1150-1154 (2006)
΄{@EAcΔjAγΡ@WA{½ςYAWHpvAcχκYA"Κ·°χΎ@ΙζιΑMN\^CΜ]Ώ"iEvaluation of Heated Chrysotile Using Phase-Contrast MicroscopejJ. Ceram. Soc. Japan, 114, 8, 716-718 (2006)
D. D. Jayaseelan, S. Zhang, S. Hashimoto and W. E. Lee, "Template Formation of Magnesium Aluminate (MgAl2O4) Spinel Microplatelets in Molten Salt" J. Eur. Ceram. Soc., 27, 16, 4745-4749 (2007).
K. Fukuda, T. Iwata, A. Moriyama, and S. Hashimoto, "Crystal Structure and Phase Transitions of SrZr(PO4)2-BaZr(PO4)2 Solid Solusions" J. Solid State Chem. 179, 12, 3870-3876 (2006).
K. Fukuda, H. Hasegawa, T. Iwata and S. Hashimoto, "Crystal Structure of Calcium Cobalt Orthophosphate, CaCo[Ca0.1Co0.9](PO4)2" Powder Diffraction, 21, 3, 220-224 (2006).
K. Inoue, K. Fukuda, M. Fuji, S. Hashimoto, T. Hayakawa, S. Honda, M. Shoyama and Y. Torii, "Fabrication and Cathode Luminescence of Partially MgO-Substituted ZnO powders" J. Ceram. Soc. Japan, 114, 7, 620-623 (2006).
Α@¬ϋaAΞμ[A΄{@EAWHpvA"A~i/ufim‘ήΏΜΑ«]Ώ" (Characterization of Alumina/Molybdenum Nanocomposites) ήΏ, Vol.55 [7] 683-687 (2006).
S-M. Choi, Uraiwan Leela-adisorn, S. Honda, S. Hashimoto and H. Awaji, "Effect of Ώ-Alumina as a Seed in Alumina/Silicon Carbide Composites" Key Engng. Mater., 317/318, 115-118 (2006).
U. Leela-adisorn, S-M. Choi,T. Matsunaga, S. Hashimoto, S. Honda, K. Hayakawa and H. Awaji and A. Yamaguchi, "AlZr2C Synthesis" Ceram. Int., 32, 4, 431-439 (2006).
U. Leela-adisorn, S-M. Choi, S. Hashimoto, S. Honda, and H. Awaji, "Sintering and Characterization of Zr2Al3C5 Monolith" Key Engng. Mater., 317/318, 27-30 (2006).
K. Fukuda, S. Mori and S. Hashimoto, "Crystal Structure of Zr2Al3C4" J. Am. Ceram. Soc., 88 [12] 3528-3530 (2005).
A. Yamuna, S. Honda, K. Sumita, M. Yanagihara, S. Hashimoto and H. Awaji, "Synthesis, Sintering and Thermal Shock Resistance Estimation of Porous Cordierite by IR Heating Technique" Micro. Meso. Mater., 85, 1-2, 169-175 (2005).
΄{@EARϋΎΗA{½ςYAWHpvAcχκYA"AXxXgάLZgΒΜAXxXgΜ@BI²Σ"iComminution of Asbestos by a Mechanical Grinding in Asbestos-Containing Cement BoardjJ. Ceram. Soc. Japan, 113 [12] 804-807(2005)
S. Zhang, S. Hashimoto and W. E. Lee, "Hydration of Aluminum Powder in Magnesia-Containing Water" J. Am. Cearam. Soc., 88 [4] 1057-1059 (2005).
S. Hashimoto, A. yamaguchi, K. Fukuda and S. Zhang, "Low-Temperature Synthesis of Leucite Crystals Using Kaolin" Mater. Res. Bull., 40, 9, 1577-1583 (2005).
S. Hashimoto, F. Sato, S. Honda, H. Awaji and K. Fukuda, "Fabrication and Mechanical Properties of Sintered Leucite Body" J. Ceram. Soc. Japan, 113 [7] 488-490 (2005).
΄{@EARϋΎΗA"AXxXgΜ@BI²ΣΖ»ΜΔ«"iComminution of Asbestos by a Mechanical Grinding and its SinterabilityjJ. Ceram. Soc. Japan, 113 [4] 312-316 (2005) U. Leela-adisorn, S.-M. Choi, N. Tera, T. Takeuchi, S. Hashimoto, S. Honda, H. Awaj, K. Hayamawa and A. Yamaguchi, "Sintering and Mechanical Properties of AlZrC2" J. Ceram. Soc. Japan, 113 [2] 188-190 (2005).
S. Zhang, S. Hashimoto and W. E. Lee, "Effect of Calcium Aluminate Cement in Water on Hydration of Aluminium Powder" Br. Ceram. Trans., 103, 4, 190-192 (2004).
S. Zhang, S. Hashimoto and W. E. Lee, "Hydration of Aluminum Metal Additives for Refractories Bond Sytems" Journal of the Technical Association of Refractories, Japan, 24 [2] 93-100 (2004).
K. Fukuda, A. Moriyama and S. Hashimoto, "Crystal Structure and Phase Transformation of Strontium Zirconium Diorthophosphate, SrZr(PO4)2" J. Solid State Chem. 177, 10, 3514-3521 (2004).
΄{@EARϋΎΗAcχκYA"J·Ξπp’½ [TCg»Μ¬"iSynthesis of Leucite Crystals Using Potash Feldspar,j J. Ceram. Soc. Japan., 112 [4] 242-244 (2004)
΄{@EARϋΎΗA"°_igEtbNXπp’½CgECXJ[Μ¬"iSynthesis of Mullite Whiskers Using Na2SO4 FluxjJ. Ceram. Soc. Japan., 112 [2] 104-109 (2004)
S. Hashimoto, S. Zhang, W. E. Lee and A. Yamaguchi, "Synthesis of Magnesium Aluminate Spinel Platelets from Ώ-Alumina Platelet and Magnesium Sulfate Precursors" J. Am. Ceram. Soc., 86 [11] 1959-1961(2003).
δγKiARϋΎΗA΄{@EA "Al4SiC4ΔΜΜμ»ΖΟ_»«"iFabrication and Oxidation Resistance of Al4SiC4 BodyjJ. Ceram. Soc. Japan, 110 [11] 1010-1015 (2002)
΄{@EARϋΎΗA"Α-A~iΖtb»igE©ηΜΒσΐ-A~i±Μ¬"iSynthesis of ΐ-Al2O3 Platelets from Α-Al2O3 and NaFjJ. Ceram. Soc. Japan, 110 [6] 587-590 (2002)
΄{@EARϋΎΗA" σ [TCg»Με«³§δ"iSize Control of Spherical Leucite CrystalsjJ. Ceram. Soc. Japan, 110 [1] 27-31 (2002)
S. Hashimoto and A. Yamaguchi, "Synthesis of MgAl2O4 (Spinel) Powder Using MgCl2" J. Ceram. Soc. Japan, 109 [10] 894-896 (2001).
K. Fukuda, A. Takeda, A. Yamaguchi and S. Hashimoto, "Characterization of Liquid Exsolved by Remelting Reaction of Belite" J. Am. Ceram. Soc., 84 [5] 1155-1160 (2001).
S. Hashimoto and A. Yamaguchi, "Synthesis of Needlelike Leucite Crystals Using Potassium Sulfate Flux" J. Ceram. Soc. Japan, 108 [8] 710-713 (2000).
S. Hashimoto and A. Yamaguchi, "Synthesis of Needlelike Mullite Particles Using Potassium Sulfate Flux" J. Eur. Ceram. Soc., 20, 397-402 (2000).
S. Hashimoto and A. Yamaguchi, "Synthesis of Spherical Leucite Crystals" J. Ceram. Soc. Japan, 108 [1] 40-44 (2000).
S. Hashimoto and A. Yamaguchi, "Synthesis of Ώ-Al2O3 Platelets Using Sodium Sulfate Flux" J. Mater. Res., 14 [12] 4667-4672 (1999).
S. Hashimoto and A. Yamaguchi, "Fabrication and Characterization of TiC/Al Composites" Mater. Sci. Eng., A265, 71-76 (1999).
S. Hashimoto and A. Yamaguchi, "Formation of Porous Aggregations Composed of Al2O3 Platelets Using Potassium Sulfate Flux" J. Eur. Ceram. Soc., 19, 335-339 (1999).
S. Hashimoto and A. Yamaguchi, "Fabrication and Propertites of Novel Composites in the System Al-Zr-C" J. Mater. Sci., 33, 4835-4842 (1998).
S. Hashimoto, A. Yamaguchi and Y. Takahashi, "Growth and Characterization of Needle-like ΐ-CaCr2O4 Crystals" Mater. Res. Bull., 32, 11, 1593-1602 (1997).
S. Hashimoto, A. Yamaguchi and T. Kamiya, "Preparation and Characterization of Ceramic Porous Sheet Composed of Platelet (Cr,Al)2O3 Crystals" J. Mater. Sci., 32, 5703-5708 (1997).
΄{@EAqc@wARϋΎΗA"MgOyΡMgO-Al2O3n²¬`ΜΜ»Α«ΙyΪ·ZrO2ΜψΚ"iEffect of ZrO2 on Sintering Characteristics of MgO and MgO-Al2O3 System Powder CompactsjJ. Ceram. Soc. Japan, 105 [8] 655-659 (1997)
΄{@EAΛc½‘ARϋΎΗA"MgO-Cr2O3 nZ~bNXΜ»Α«Ζ (Mg8-XCrX)Cr16O32(0 X 2.88)ΜΆ¬"iSintering Characteristics in the System MgO-Cr2O3 and Formation of (Mg8-XCrX)Cr16O32(0 X 2.88)jJ. Ceram. Soc. Japan, 104 [12] 1121-1124 (1996)
S. Hashimoto, A. Yamaguchi and S. Oya, "Formation and Needle-like ΐ-Ca2SiO4 Crystals by Vapor Phase Reaction" J. Cryst. Growth, 169, 376-379 (1996)
S. Hashimoto and A. Yamaguchi, "Preparation of Porous Cr3C2 Grains with Cr2O3," J. Am. Ceram. Soc., 79 [9] 2503-2505 (1996).
S. Hashimoto and A. Yamaguchi, "Growth Morphology and Mechanism of a Hollow ZnO Polycrystal" J. Am. Ceram. Soc., 79 [4] 1121-1123 (1996).
S. Hashimoto and A. Yamaguchi, "Synthesis of MgAl2O4 Whiskers by an Oxidation Reduction Reaction" J. Am. Ceram. Soc., 79 [2] 491-494 (1996).
S. Hashimoto and A. Yamaguchi, "Growth of Cr2O3 Whiskers by the Vapour-Liquid- Solid Mechanism" J. Mater. Sci., 31, 317-322 (1996).
S. Hashimoto and A. Yamaguchi, "Synthesis of Mg2SiO4 Whiskers by an Oxidation- Reduction Reaction" J. Am. Ceram. Soc., 78 [7] 1989-1991 (1995).
S. Hashimoto and A. Yamaguchi, "Growth of Hollow Cr3C2 Polycrystals with Cr2O3" J. Am. Ceram. Soc., 78 [7] 1985-1988 (1995).
S. Hashimoto and A. Yamaguchi, "Growth of MgCr2O4 Whiskers" J. Cryst. Growth, 154, 329-333(1995).
A. Yamaguchi and S. Hashimoto, "Growth of Magnesia Whiskers" Ceram. Int., 18, 301-305(1992).